DIY 3D Embossing Wood Plastic Composite Floor Patio Garden Swimming Pool Balcony Piso Walkway Roof Tiles WPC Board Interlocking Deck Tiles

• Customization: Available
• Brand Name: Kelai
• Type: WPC DIY Decking
• Model NO.: BS-01
• Model: BS-01
• Surface: 3D Embossing
• Size: 300*300*20mm
• Material: Wood Fiber+HDPE+Additives
• Feature: Anti-Slip,Anti-UV,Waterproof,Crack Resistance Ect
• Application: Outdoor,Garden,Terrace
• Certificate: ISO9001 /Intertek /TUV /ISO14001 / CE
• Technic: Wood Plastic Composite
• Delivery Time: 15-20 Days After We Received The Deposit
• Transport Package: Covered Tightly with Box
• Specification: 300*300*20mm
• Trademark: All countries
• Origin: Zhejiang, China
• Production Capacity: 15000 Tons Per Years

Product Description

Product Introduction
Kelai DIY WPC decking is made of 60% wood fiber,30%HDPE and 10% additives.
These all material are very friendly.And the decking is anti-slip,anti-uv,crack resistant,anti-corrosion,anti-deformation,heat resistant and anti-mite.However the important thing is that the wpc decking doesn't need any maintance.

Surface : Deep wood grain

     

 

Type	WPC DIY decking
Technic	Wood Plastic Composite
Size	300*300*20mm
Surface	Online embossing
Model	BS-01
Delivery Time	15-20 days after we received the deposit
Certification	ISO9001/Intertek/TUV/CE/ISO14001
Application	pond surrounds, paths, patios or balconies

Feature
1.Our diy decking with high density,high strength and good looking
2.Our diy decking is non absorbent,effectively prevent the decay and damage
3.Our diy decking advocates environmental protection,back to nature
4.Our diy decking creates beautiful and comfortable land
5.Our diy decking is anti-corrosion,anti-crack,anti-deformation
6.Our diy decking is easy to install and clean

Colors



Storage and Maintenance
1.Please don't arbitrarily stack when discharge WPC materials.
2.Because of the possibility of deformation of composite decking, so please don't vertically discharge, and please level on the ground when storage WPC decking.
3.Place on the plane, should prevent the rain, please use the protective material to cover.In order to get better supporting effect, please support to the edge when transport WPC decking.
4.When put on the hard ground, there should have suitable material to underlay at the bottom, please pay attention to the cutting ends and don't have impact phenomenon.
5.Don't have a hammer and other hard things fall impact,all these may cause WPC products damaged.
6.When move WPC decking material, we should avoid mutual sliding friction. Move out from the whole stack,and should lift,then place.
7.When install WPC decking, please don't let tools, screws or tools equipment sliding on the decking surface.
8.Avoid WPC decking touch with the building waste.
9.After the scrape, WPC chip contain resin component , so we shouldn't treat it as burning garbage disposal, please deliver the debris and other waste materials to factory for recycle, not only it can protect our earth, but it also realize WPC material recycling.

Application


Installation Instruction

Shipping and Packing

Enterprise Display

Exhibition



Certification

FAQ
Q: What is the species of wood fiber you use?
A: Eucalyptus, poplar and some mixed wood, which is color related.

Q: What about your main market?
A: The main market is always oversea. More than 90% of the products are for export, and main market is Greece, Czech Republic,Italy,Germany, Spain, Austria, Swiss, Estonia, Norway, UK, Korea, Thailand, Indonesia, Vietnam, USA, Canada, Argentina,Australia,etc.

Q: Do your WPC products have color fading problem?
A: To be honest, the products do have some color fading problem mostly during the first 6 months after installation, but not obvious.

Q: How many production lines you have? What about the production capacity per month?
A: 14 extrusions lines. 30-35 containers per month.

Q: What properties will you test for your raw material and end products?
A: Wood fiber: ash content, fiber size, water content.
HDPE: melting index, ash content, physical property test for finish product
End product: melting index, ash content, physical property test for finish product
End product: strength test, boiling test and expansion rate test, temperature cycle test, outdoor UV test

Q: What about delivery time for one container?
A: 15-20 days upon deposit payment well received.

Q:What about the temperature range of your WPC can be used?
A: -40 to 60 degrees.

Q: Have you ever received any complaints from your customers?
A: Frankly speaking, yes. And it's mainly about color difference, cause our raw material is recycled material, there is always difference between different lots. Now mixing is done for our HDPE plastic and also after pelletizing to well control of this problem.