Outdoor Wood Plastic Composite Deck Flooring Tile WPC Composite Decking for Building Material

• Customization: Available
• After-sales Service: Online Technical Support
• Warranty: More Than 5 Years
• Model NO.: KG905
• Certification: Thermal Insulation, Soundproof, Anti-Static, Waterproof, ISO, CE
• Usage: Outdoor
• Type: Co-Extrusion Hollow WPC Decking
• Model: Kg905
• Surface: PE Surface Layer
• Technic: Matt Finish
• Size: 138*23mm
• Length: 2.2m/2.9m/3m/4m/5.8m or as Your Requirement
• Material: Wood Fiber+HDPE+Additives+PE
• Feature: Anti-Slip,Anti-UV,Waterproof,Crack Resistance.etc
• Certificate: ISO9001 /Intertek /TUV /ISO14001 / CE
• Delivery Time: 15-20 Days After We Received The Deposit
• MOQ: 100sqms
• Transport Package: Covered Tightly with Pallet or Bundles
• Specification: 138*23mm
• Trademark: KELAI
• Origin: Zhejiang, China
• HS Code: 3918909000
• Production Capacity: 15000 Tons Per Year

Product Description

Product Introduction
KELAI co-extrusion WPC decking is made of surface layer and core layer.The material of surface layer is PE(it used to make golf ball).And the material of core layer is the same as traditional WPC decking.Why add plastic surface layer? The skin made of soft plastic can make the decking feel better when the foot steps on. Due to the characteristics of the plastic material itself, the co-extrusion products can be made in a variety of colors and not be easy to fade. In addition, it is more resistant to contamination. If food or beverages fall on it, it's easy to clean up and doesn't pick up contaminants like wood does.

These all material of WPC decking are very friendly.And the WPC decking is anti-slip,anti-uv,crack resistant,anti-corrosion,anti-deformation,heat resistant and anti-mite.However the important thing is that the WPC decking doesn't need any maintenance.
Compared with traditional WPC decking,the most important feature of the new generation WPC decking is pollution resistance.

Type	Co-extrusion WPC hollow decking
Technic	Matt finish
Size	138*23mm
Length	2.2m/2.9m/3m/4m/5.8m as your requirement
Model	KG905
Delivery Time	15-20 days after we received the deposit
Certification	ISO9001/Intertek/TUV/CE/ISO14001
Application	Garden,Balcony,Alfresco Restaurant,Swimming Pool,SPA Surrounds,Corridor,Boardwalk,Garage

Surface Treatment

Feature 
1.Our co-extrusion wpc composite decking With high density,high strength and good looking.
2.Our co-extrusion wpc composite decking is non absorbent,effectively prevent the decay and damage.
3.Our co-extrusion wpc composite decking advocates environmental protection,back to nature.
4.Our co-extrusion wpc composite decking creates beautiful and comfortable land.
5.Our co-extrusion wpc composite decking is anti-corrosion,anti-crack,anti-deformation.
6.Our co-extrusion wpc composite decking is easy to install and clean.

Colors 

                                                                                                                         

Application

                                                                                                                                          

Installation

Storage and Maintenance
1.Please don't arbitrarily stack when discharge WPC materials.
2.Because of the possibility of deformation of composite decking, so please don't vertically discharge, and please level on the ground when storage WPC decking.
3.Place on the plane, should prevent the rain, please use the protective material to cover.In order to get better supporting effect, please support to the edge when transport WPC decking.
4.When put on the hard ground, there should have suitable material to underlay at the bottom, please pay attention to the cutting ends and don't have impact phenomenon.
5.Don't have a hammer and other hard things fall impact,all these may cause WPC products damaged.
6.When move WPC decking material, we should avoid mutual sliding friction. Move out from the whole stack,and should lift,then place.
7.When install WPC decking, please don't let tools, screws or tools equipment sliding on the decking surface.
8.Avoid WPC decking touch with the building waste.
9.After the scrape, WPC chip contain resin component , so we shouldn't treat it as burning garbage disposal, please deliver the debris and other waste materials to factory for recycle, not only it can protect our earth, but it also realize WPC material recycling.

Enterprise Display
Kelai was created to bring you the best wpc/composite products from China.Our Team of professionals have many years of experience in the export and domestic market. Kelai is selling our wpc/composite products to more than 30 countries around the world, like USA, Canada, Mexico, etc.

 

Shipping and Packing

Packing:Covered co-extrusion wpc decking tightly with pallet or bundles or as your requirement.

 

Certification

FAQ

Q: What is the species of wood fiber you use?
A: Eucalyptus, poplar and some mixed wood, which is color related.

Q: What about your main market?
A: The main market is always oversea. More than 90% of the products are for export, and main market is Greece, Czech Republic,Italy,Germany, Spain, Austria, Swiss, Estonia, Norway, UK, Korea, Thailand, Indonesia, Vietnam, USA, Canada, Argentina,Australia,etc.

Q: Do your WPC products have color fading problem?
A: To be honest, the products do have some color fading problem mostly during the first 6 months after installation, but not obvious.

Q: How many production lines you have? What about the production capacity per month?
A: 30 extrusions lines. 60 containers per month.

Q: What properties will you test for your raw material and end products?
A: Wood fiber: ash content, fiber size, water content.
HDPE: melting index, ash content, physical property test for finish product.
End product: melting index, ash content, physical property test for finish product
End product: strength test, boiling test and expansion rate test, temperature cycle test, outdoor UV test.

Q: What about delivery time for one container?
A: 15-20 days upon deposit payment well received.

Q:What about the temperature range of your WPC can be used?
A: -40 to 60 degrees.

Q: Have you ever received any complaints from your customers?
A: Frankly speaking, yes. And it's mainly about color difference, cause our raw material is recycled material, there is always difference between different lots. Now mixing is done for our HDPE plastic and also after pelletizing to well control of this problem.